Your Local Insulation Contractor in Cañon City CO - Warmer Rooms, Fewer Drafts
Beacon Cañon City Spray Foam Insulation insulates attics and seals drafty houses in and around Cañon City and Pueblo West. We also clear out old insulation in older houses and insulate crawl spaces when the floors run cold.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Start with an urgent problem or a plan
Drafts or cold rooms now
Call (719) 204-8345, any day of the week from 7 AM to 10 PM. We answer our own phone and get back to you within one business day.
Planning an insulation project
Tell us about it through the contact form. We'll get back to you within one business day to set up a free estimate at your house, with no obligation.
Insulation contractor services in Cañon City, CO
Beacon Cañon City Spray Foam Insulation is an insulation contractor in Cañon City, CO, with 16 services covering attics, walls, crawl spaces and basements. Most calls start with a cold room, a drafty house or old insulation nobody's sure about, and the fix should hold your heat without starting a new problem. The price moves with how much area we cover, what's already there, whether old material has to come out and whether you go with foam or loose fill. The schedule turns on the prep, because gaps get sealed and problems get fixed before anything new goes in. The written estimate I give you lays out what we'd do, where and why.
Spray foam insulation
Spray foam expands to fill every gap in a wall, rim joist or roofline, so it insulates and stops air moving in one pass.
Attic insulation
Hot upstairs in summer and cold in winter? Usually the attic is thin or uneven, and we bring it up to an even depth, edge to edge.
Blown-in insulation
Blown-in insulation is loose fill blown through a hose, and it's the usual way we top up an attic floor once the gaps are sealed.
Home insulation
For a house that's drafty all over, we look at the attic, walls, crawl space and basement together and fix them in the order that matters.
Insulation removal
Old insulation that got soaked or full of droppings has to come out before anything new goes in, or the problem just stays under fresh material.
Crawl space insulation
Cold floors usually start in the crawl space, so we insulate down there and seal the gaps where outside air works its way in.
Wall insulation
Can you insulate walls without tearing them out? Usually yes. We fill closed wall cavities through small holes and plug the holes when we're done.
Air sealing services
Air sealing means closing the gaps around plumbing, wiring, outlets and doors where outside air gets in, so the heat you pay for stays put.
Basement insulation
We insulate basement walls and rim joists, the wood band sitting on top of the foundation, so the basement and the room above it hold heat.
Closed-cell foam insulation
Closed-cell foam is a dense foam that blocks moisture as well as air, which makes it a good fit for rim joists, crawl space walls and other damp spots.
Open-cell foam insulation
Open-cell foam is softer and lighter than closed-cell, and it fills odd-shaped walls and rooflines well where moisture isn't the worry.
Commercial insulation
Business owners call us too. We insulate shops, offices and other commercial buildings, checking what's there before we quote, the same as we do at a house.
Crawl space vapor barrier
We lay a heavy plastic sheet over the crawl space dirt so ground moisture stays down there instead of working into the floor and framing above.
Vapor barrier installation
A vapor barrier is a sheet that slows moisture moving through a wall, floor or ceiling, and we install one wherever the assembly calls for it.
Attic air sealing
Before any insulation goes down, we seal the attic floor around can lights, pipes, wiring holes and the hatch, where warm air slips out of the house.
Retrofit insulation
Retrofit insulation is adding insulation to a house that's already built and lived in, working around finished walls, old wiring and whatever's already up there.
Why homeowners hire us for insulation
Most insulation goes in fine. What goes wrong is usually what's under it, around it and at the edges, and that's where we spend our attention.
The owner writes your estimate
I come out and write every estimate myself, so the answers you get are straight ones, including a plain no when a job isn't worth your money or you don't need us.
Problems fixed before insulating
We look for old wiring, wet spots, gas appliances and bad insulation first, because burying a problem under new material means paying for the job twice.
Gaps sealed, vents kept clear
We seal the gaps around can lights, pipes and the hatch before insulation goes in, and we keep the eave vents clear so the attic can still breathe.
A small outfit that answers
We're a small business based in Cañon City, so when you call (719) 204-8345 you reach someone who works here. Call when you're ready to have someone look at your house.
How an insulation job runs with us
Every job follows the same four steps, whether it's one cold room or the whole house. The point is to find what has to come first before anyone spends money.
Call or send the form
Call (719) 204-8345 or send the form and tell us what's going on, whether it's a cold room, a drafty house or old insulation you're not sure about. A person who works here answers, and we get back to you within one business day to set up a visit.
I look and write the estimate
I come out myself and look at the attic, crawl space, walls or basement, and I note anything that has to be fixed first, like old wiring or wet spots. You get a free written estimate that says what we'll do, where and why, with no obligation to go ahead.
Permit, then the work
We find out which building office covers your address and sort out any permit the job needs before we start. Then our own crew does the work, clearing out what has to go, sealing the gaps and then insulating. We tell you ahead of time if you'll need to be out and when you can come back.
We walk it together
When the crew is finished, I walk the job with you before we call it done. You see the depth across the whole attic, edges included, the sealed gaps and the clear vents, and you can ask anything while we're both standing there.
About Beacon and who you're dealing with
Beacon Cañon City Spray Foam Insulation is an insulation contractor based in Cañon City, CO, and we've been doing this work since 2021. We're fully licensed and insured. I taught myself insulation on my own drafty house and learned the rest on other people's jobs, and today we offer 16 insulation services across Cañon City, Pueblo West and the cities around them. You can read more about us and how we work.
What insulation work looks like
These photos show insulation work up close, from blown-in attic floors to spray foam in walls and crawl spaces, so you know what each kind looks like.
Where we work around Cañon City
Beacon Cañon City Spray Foam Insulation is based in Cañon City, CO. This site has pages for 2 areas, Cañon City and Pueblo West, and we work in other cities around them too.
Insulation questions we hear most
How much does it cost to insulate an attic in Cañon City?
It depends on your attic, and I won't guess at it over the phone, which is why the estimate is done on site. How many inches are already up there, whether that old material is clean or soaked and how many gaps need sealing all change the price.
Why does removing old insulation add to the cost of the job?
Removal is a separate job, because old material has to be bagged and hauled out before anything new goes in. We only recommend it when the old insulation is soaked, full of droppings or doing more harm than good, and the estimate says why.
How long will the insulation crew be at my house, and do we have to leave?
It depends on the size of the job and how much prep it needs, and I tell you how long to expect when I write the estimate. With blown-in you can usually stay home. With spray foam, you, the kids and the pets stay out until the re-entry time, the point when it's safe to come back in, and we give you that before we start.
Should I get spray foam or blown-in insulation for my attic?
For most attics, sealing the gaps and topping up with blown-in is the better buy, because foam costs more. Foam earns its price when the ductwork runs through the attic, since it seals air while it insulates and protects those ducts at the same time.
What do you check in an attic before adding insulation?
I check how many inches are already there, whether the depth is even out to the edges and whether anything is wet or full of droppings. I also look at the eave vents and the gaps around lights, pipes and the hatch, since those decide what has to happen before new insulation goes in.
Who do I ask about a permit for insulation work in Cañon City?
Inside Cañon City limits, ask the city's Building Department at (719) 276-5253, and outside any city, ask the Fremont County Building Department. If old wiring has to be fixed first, the state handles electrical permits and inspections, not the city. We check which office covers your address and sort out any permit before work starts.
Is your insulation company licensed and insured?
Yes, we're fully licensed and insured. In Cañon City, contractor licenses come from the city's Building Department, which licenses general and limited contractors through its own application process.
Do you guarantee your insulation work?
Yes, our work is backed by our satisfaction guarantee. Before we call a job done, I walk it with you, so that's the time to point at anything that doesn't look right.
Tell us about your attic, crawl space or walls
Send the form and we'll get back to you within one business day to set up a visit. I come out, look at the job and give you a free written estimate, with no obligation.
(719) 204-8345